HOW IT WORKS

First, we drain your pool using a submersible pump. Then we wash the pool down (scrub if necessary) and remove all algae, leaves etc. Once the pool is clean and empty, we start the tile cleaning process. After cleaning the tile, we rinse down and vacuum the entire pool making sure glass bead is gone. Next, we acid wash the pool surface, rinse it down, and drain all the dirty water out. Finally, we apply a clear sealer to the tile and begin filling the pool with fresh water (from your water hose). Once the pool is filled, you give us a call and we will stop by and add the start up chemical.

BEFORE & AFTER

Other services may utilize cheap cleaning materials to offer you a lower rate, we only use the best possible product which is glass beads in our tile cleaning system. The glass is soft and will not harm your tile.
We do a vacuum recovery of our glass media as well as a thorough cleaning around the pool.
After your tile is cleaned, we apply a clear sealer to the surface. This sealer will help slow future Buildup by providing a barrier between the tile and future build up.

AN ACID WASH will generally remove most stains, fine scale deposits, and some colored deposits from plaster or pebble-tec. The process strips off/dissolves a thin layer of plaster/pebble-tec, and will generally restore about 70/80 percent of the it's brightness. PLEASE NOTE: An acid wash will not remove heavy deposits or stains that have penetrated through many layers of plaster or pebble-tec. Acid washing is the most practical means of removing unsightly stains

Aqua Patrol Pool Service is a friendly & professional company that will ensure the job is done to your satisfaction. Please give Aqua Patrol a call and let us get the job done right!

HOME

aquapatrol@netscape.net
602-309-0477